Hydraulic trolley jack, 3.5 t, lifting range 145-490 mm, with a pedal MATRIX MASTER
Categories: Hydraulic trolley jacks
The MATRIX MASTER hydraulic roll-up jack with safety valve is designed for lifting loads of up to 3.5 tons. Jack is an irreplaceable tool in car service and often used during repair and construction works. The minimal height of the MATRIX MASTER jack pick is 14.5 cm. The maximal height the jack can lift load is 49 cm. This height is sufficient to set a rigid support under the lifted load and perform repairs. The safety valve prevents lifting load exceeding the weight specified by the manufacturer. A pedal helps to quickly set the lifting device of the jack to the required height. ATTENTION! The jack is not designed for long holding of overhanging load or its movement. Prior to lifting ensure the load is uniformly distributed over the center of the bearing surface of the jack. The weight of the lifted load should not exceed that specified by the manufacturer. During operation the jack should be installed on a flat horizontal surface. After lifting it is necessary to use special supporting stands to support the load. It is forbidden to perform works under the lifted load in absence of holding supports. Prior to works be sure to read the operation manual for the product.