Hydraulic bottle jack, 10 t, lifting range 230-460 mm MATRIX MASTER
The MATRIX MASTER hydraulic jack with safety valve is designed for lifting loads of up to 10 tons. Jack is an irreplaceable tool in car service and often used during repair and construction works. The minimal height of the MATRIX MASTER jack pick is 23 cm. The maximal height the jack can lift load is 46 cm. This height is sufficient to set a rigid support under the lifted load and perform repairs. The safety valve prevents lifting load exceeding the weight specified by the manufacturer. ATTENTION! The jack is not designed for long holding of overhanging load or its movement. Prior to lifting ensure the load is uniformly distributed over the center of the bearing surface of the jack. The weight of the lifted load should not exceed that specified by the manufacturer. During operation the jack should be installed on a flat horizontal surface. After lifting it is necessary to use special supporting stands to support the load. It is forbidden to perform works under the lifted load in absence of holding supports. Prior to works be sure to read the operation manual for the product.
Be the first one to leave a comment about this product!