Hydraulic bottle jack, telescopic, 10 t, lifting range 198-519 mm MATRIX

Product code: 507445

Categories: Hydraulic bottle jacks

The MATRIX hydraulic jack with telescopic mechanism is designed for lifting loads of up to 10 tons. Jack is an irreplaceable tool in car service and often used during repair and construction works. The minimal height of the MATRIX jack pick is 19.8 cm. Due to telescopic mechanism, the max lifting height is 51.9 cm. ATTENTION! The jack is not designed for long holding of overhanging load or its movement. Prior to lifting ensure the load is uniformly distributed over the center of the bearing surface of the jack. The weight of the lifted load should not exceed that specified by the manufacturer. During operation the jack should be installed on a flat horizontal surface. After lifting it is necessary to use special supporting stands to support the load. It is forbidden to perform works under the lifted load in absence of holding supports. Prior to works be sure to read the operation manual for the product.